Share on facebook
Share on twitter
Share on whatsapp
Share on email
Share on telegram
Profometer 650 AI
Switzerland
rebar detection, cover and diameter size measurement
Cover calibration
Full 2D rebar visualization
Display with cover curve or signal strength curve
Zoom in to scale rebars
Highest cover measurement accuracy through AI feature

Fast and accurate rebar detection, cover and diameter size measurement
Rebar location is a central activity for anyone involved in on-site testing of reinforced structures. Locating rebars is a necessity when drilling, cutting coring as well as a preliminary operation required for most other non-destructive investigations. Other typical applications include conformity check of new buildings, investigations on unknown structures and corrosion analysis. The eddy current pulse induction principle is the only imaging technology not influenced by concrete composition and humidity, which leads to a high cover accuracy under every scenario.

Since the early 1970s, Proceq has been addressing those different needs through a continuous development effort of rebar locators and concrete cover meters, offering the best features needed for any specific application.

Advanced cover meter based on the new generation Profometer touchscreen with universal probe and scan cart. Enhanced correction factor for maximum cover accuracy on congested rebar arrangements. Dedicated functionalities for mapping concrete cover and for reporting any 2D rectangular rebar arrangement. 

OVERVIEW

 

Highest cover measurement accuracy ever through Artificial Intelligence (AI) feature  Highest cover measurement accuracy ever through Artificial Intelligence (AI) feature
 
Full 2D rebar visualization with detailed cover, rebar size and spacing data for fast reporting  Full 2D rebar visualization with detailed cover, rebar size and spacing data for fast reporting
 
Scalable solution with upgrade possibility to Profometer Corrosion  Scalable solution with upgrade possibility to Profometer Corrosion
 
Cover Measuring Range: Up to 185mm
 
Cover Measuring Accuracy: 1 to 4mm, depending on cover
 
Path Measuring Accuracy on Smooth Surface: 0.5 to 1.0% of measured length
 
Diameter Measuring Range: Up to 63mm
 
Diameter Measuring Accuracy: 1 rebar size
 
Available Upgrades: To Profometer Corrosion
  • Locate rebars and live wires before drilling, cutting and coring
  • Spot check of rebar cover
  • Measurements on rough surfaces with scan cart
  • Measuring wide areas over long distances
  • Conformity check of new buildings
  • Fire resistance assessment
  • Investigation of unknown structures
  • Complete, 2D and 3D imaging of rebar layout
  • Corrosion analysis

Instrument Firmware

  • 2-Layer Neighboring Rebar Correction Artificial Intelligence (NRC AI)
  • Cover calibration
  • Zoom in to scale rebars according to your needs
  • Display with cover curve or signal strength curve
  • Signal strength spectrum for further evaluation
  • Visual assistance for scanning speed and signal strength control
  • Settings directly accessible on the measurement screen
  • Graphical display of measured values and minimum cover set
  • Change settings before and after storage
  • 11 Languages and timezone supported

 

Display

  • 7” color rugged touchscreen unit (800 x 480 pixels) with dual core processor

 

Measurement Modes

  • Rebar location, diameter estimation and cover measurement
  • Data acquisition
  • One layer scans, tomographic view, advanced statistics
  • Two layers scans, tomographic view, advanced statistics
  • BS 1881, Part 204
  • DIN 1045
  • DGZfP B2
  • SN 505262
  • SS 78-B4