Menu
Giatec XCell™ is a smart tablet-based NDT probe for fast, accurate and efficient detection and on-site analysis of corrosion in reinforced concrete structures. Giatec XCell™ meets all the requirements of the ASTM C876 standard specification.
Giatec XCell™ benefits from an advanced Wireless-enabled maintenance-free sensor that measures the corrosion potential and sends it wirelessly to a tablet for generating half-cell contour plots (i.e. corrosion maps) in real-time. The results can be shared easily with the engineering office. Giatec XCell™ significantly reduces the labor cost associated with the data collection and subsequent contour plot generation and reporting
Giatec XCell™ can be used for efficient and accurate corrosion mapping according to the ASTM C876, “Standard Test Method for Half-Cell Potentials of Uncoated Reinforcing Steel in Concrete”. The results are analyzed using the Android-based application onsite for the identification of locations with high probability of corrosion.
General | |
Type | Value |
Voltage Measurement Range | ± 1000mV |
Measurement Resolution | 0.1mV |
Sampling Rate | 1s |
Input Impedance | >10 M ohm |
Temperature Measurement Range | -10°C~50°C |
Temperature Measurement Accuracy | 0.5°C |
Communication Protocol | Wireless V4.0 LE |
Probe Weight | 250 gr |
Operating conditions | |
Type | Value |
Operating temperature | 0~45°C |
Operating humidity | 20~90% |
Storage temperature | -20~70°C |
Storage humidity | 10~90% |
Dimensions of XCell™ Probe | 32mm x 260 mm (D x L) |