The Pile Integrity Tester (PIT) gives peace of mind that a pile or shaft is free of major cracks and voids, prior to construction of the superstructure. It may be used on most concrete or wood foundations. The PIT may also be used to test piles integral in the structure, such as those supporting existing bridges or towers, and may assess their length.

The PIT performs wave equation-based non-destructive foundation investigations known as Low Strain Impact Integrity Tests or Low Strain Dynamic Tests. These test may be performed by the Pulse (or Sonic) Echo or Transient Response Methods. With the PIT, any form of the test is performed fast, potentially making it possible to test every pile on a job site.

The PIT test consists of attaching one or two accelerometers to the foundation and using a hand-held hammer to impact it. The PIT collects the acceleration data and displays curves that reveal any significant changes in cross section that may exist along the shaft. 

The Pile Integrity Tester is available in several configurations to match the needs of each user.  Find out which model is right for you here.

PIT-X is much smaller and may read data from a wireless accelerometer. PIT-X has one data input channel, used to record the acceleration measured on the pile. This is sufficient for many, and perhaps most, applications. The analysis of acceleration data is usually performed in the time domain.

All models of the Pile Integrity Tester are battery powered, operated through a high visibility touch screen, and include a Fast Fourier Transform (FFT) feature and a license of PIT-W Standard Software. All comply with ASTM D5882 and many other codes and specifications.