The Pile Driving Analyzer® (PDA) system is the most widely employed system for Dynamic Load Testing and Pile Driving Monitoring in the world. High Strain Dynamic Load Tests, also called Pile Driving Analyzer® tests, assess the capacity of several piles in a single day. Pile Driving Analyzer systems also evaluate shaft integrity, driving stresses, and hammer energy when monitoring installation. If you plan to use your PDA to test non-driven piles make sure to read about that application as well.
The Pile Driving Analyzer® Model 8G is the culmination of a complete redesign effort that incorporates the latest technological innovations and truly embodies Pile Dynamics’s commitment to quality. The PDA-8G looks sophisticated, as so is the software that powers it. Thin, light and ergonomic, it features touchscreen gesture controls like swiping and pinch-to-zoom. The PDA-8G offers up to 16 universal channels of data acquisition, all capable of reading data from Smart Sensors in traditional (cabled) or wireless mode. This functionality allows for extreme pile testing flexibility. Improved data transfer makes it easier to test hydraulic hammers with high blow rates.
Pile Driving Analyzer® tests are performed during driving on pilot or production piles, taking advantage of the high strain impact provided by the driving hammer. Re-strike PDA tests are often recommended; if the driving hammer is no longer on location, a drop weight may be used to impact the pile.
The Pile Driving Analyzer®-8G takes data obtained by accelerometers and strain transducers easily attached to the pile and calculates foundation capacity. In addition, it calculates multiple important quantities by the Case Method and iCAP®. iCAP computes capacity in real time after every blow by signal matching (similar to CAPWAP®). This calculation is often more accurate than Case Method capacity and better evaluates stresses in the pile.
With the Pile Driving Analyzer®-8G, the engineer has the option of being in the field for the pile driving test or of using SiteLink® technology. SiteLink technology transmits PDA test data via Internet to an engineer located elsewhere who follows the test in real time. Test data displays and results are identical in both modes.
The PDA-8G is furnished with the PDA Software Suite, CAPWAP and GRLWEAP. CAPWAP analysis of PDA data is essential for a Dynamic Load Test. It provides the soil resistance distribution along the foundation and simulates a static load test. Extensive correlations between CAPWAP simulated and actual static load tests have proven the reliability of this method of determining pile capacity.
The PDA-8G conforms to ASTM D4945 and many other codes and specifications. The Pile Driving Analyzer® Software Suite, consisting of PDA-S with iCAP, PDIPLOT2 and PDI-Curves, outputs reports that satisfy ASTM 4945 requirements. An SPT Software add-on to the PDA-S enables the PDA-8G to determine the energy transferred to SPT rods (read about this application).
Pile Dynamics recommends that all those who perform dynamic tests using the Pile Driving Analyzer® take the Dynamic Measurement and Analysis Proficiency Test offered by PDI and PDCA. Read about the need for quality testing.
Physical:
- Size: 320 X 250 X 68 mm (12.6 x 9.8 x 2.7 inches)
- Weight: 5 Kg (11 lbs)
- Temperature range: 0 to 40°C (32 to 104° F) operating; -20 to 65°C (-4 to 149° F) storage
- Display: 26.4cm (10.4”), sunlight readable, resolution 1024 X 768
- Built in capacitive touch screen
- Video Outputs: HDMI, VGA
- Power: 4 hour continuous data collection battery pack, 12 VDC car battery, or 100-240 VAC. Extra battery pack supplied.
- Charging time: 6 Hours max.
Electronic:
- Microsoft Windows® 10 Operating System
- 60 GB SSD internal drive
- Ethernet port
- 4 USB ports
- Analog signal conditioning filtering (frequency response) 2.5 KHZ (-3 dB)
- 16-bit A/D converter with sampling frequency of 10.24 MHz
- 8 channels with effective digitizing frequency of 10 KHz to 40 KHz selectable
- 1K, 2K, or 4K data record sizes available
- Basic unit accuracy 2%
Functional:
- Built in calibration test function
- Compatible with Smart Sensors
- Wireless range up to 100 m (328 ft)
- Up to 16 universal (strain or acceleration, piezoelectric or piezoresistive) channels of wireless data acquisition1
- Up to 8 universal (strain or acceleration, piezoelectric or piezoresistive) channels of traditional data acquisition
- Automatic balancing of signals and signal conditioning
- Digital (software) integration of acceleration
- Signal conditioning for force and acceleration have similar frequency response
- Internal calibration check of strain and acceleration
- Signal amplification capability
- Triggers on any attached strain transducer; simultaneous trigger of all channels
- User adjustable pre-trigger buffer size
- High speed internet data transmission using SiteLink® through broadband phone or other network device (additional desktop sharing software needed)
- Dial up data transmission through data capable mobile phone connected via USB
1 limited to one piezoelectric accelerometer per box
Other:
- Operates in English, SI, or Metric units
- Optional external USB keyboard, mouse, and WiFi (802.11b,g,n) available
- Includes both soft side carry-on luggage case and hard transit case
- Equipped for remote technical support using SiteLink
- Optional TeamViewer desktop sharing software license for use with SiteLink
- Furnished with licenses for PDA Software Suite (PDA-S, iCAP®, PDIPLOT2 and PDI Curves), GRLWEAP and CAPWAP®
- Full one year warranty
- PDA manual in PDF format and printed CAPWAP manual included
* The PDA-8G is patented under the Remote Pile Driving Analyzer US Patent No. US 6301551 B1
You must be logged in to post a comment.