Resipod
Switzerland
- DEMO
- Training
- MAINTENANCE
- AFTER-SALES SERVICE
concrete resistivity and permeability
All-in-one solution for concrete electrical resistivity testing
Concrete resistance to aggressive agents
Current flow indication and poor contact indication
Highest resolution available for a surface resistivity instrument
Checking fiber distribution in a steel fiber reinforced concrete
Service life and durability assessment of reinforced concrete structures
The construction industry is rapidly moving towards performance based specifications for concrete durability of new structures; at the same time the assessing of service life of actual reinforced concrete elements is being a subject of increasing concern in the industry. Half-cell potential, concrete resistivity and concrete cover air permeability are the main and most widely accepted indicators of likelihood of corrosion and estimated durability of a concrete structure.
Proceq’s Profometer Corrosion, Resipod and Torrent instruments are designed and manufactured to assess the durability of concrete structures by measuring corrosion potential, concrete resistivity and permeability.
A complete solution for measuring the electrical resistivity of concrete both in the laboratory under controlled conditions and on site. Standard fixed spacing surface Wenner probe with variable spacing and bulk resistivity accessories.
OVERVIEW
All-in-one solution for concrete electrical resistivity testing
Equally reliable, accurate and standardized but faster than laboratory RCP testing
Rugged water-proof constructionMeasured Quantity
Electrical resistivity [kΩcm]
Accuracy
From ±0.2 to ±2 kΩcm (depending on resistivity range)
Corrosion rate estimation
Concrete resistance to aggressive agents
Concrete homogeneity
Curing conditions
Checking fiber distribution in a steel fiber reinforced concrete
- Highest resolution available for a surface resistivity instrument
- Current flow indication and poor contact indication
- Hold, save and delete function
PC SOFTWARE
ResipodLink to view and manipulate the data on a connected PC. It also allows a variable contact spacing to be set.
DISPLAY
Pixel graphic LCD
Memory
500 measured values
Measuring Range
1 to approx. 1000 kΩcm (depending on probe spacing)
Probes / Electrodes
In addition to the standard Wenner probe with spacing of 50 mm or 38 mm (1.5″), additional variable spacing probe and bulk resistivity accessories available
- AASHTO T358-15
You must be logged in to post a comment.